Current Understandings on Magnesium Deficiency and Future Outlooks for Sustainable Agriculture

The productivity of agricultural produce is fairly dependent on the availability of nutrients and efficient use. Magnesium (Mg²⁺) is an essential macronutrient of living cells and is the second most prevalent free divalent cation in plants. Mg²⁺ plays a role in several physiological processes that support plant growth and development. However, it has been largely forgotten in fertilization management strategies to increase crop production, which leads to severe reductions in plant growth and yield. In this review, we discuss how the Mg²⁺ shortage induces several responses in plants at different levels: morphological, physiological, biochemical and molecular. Additionally, the Mg²⁺ uptake and transport mechanisms in different cellular organelles and the role of Mg²⁺ transporters in regulating Mg²⁺ homeostasis are also discussed. Overall, in this review, we critically summarize the available information about the responses of Mg deficiency on plant growth and development, which would facilitate plant scientists to create Mg²⁺-deficiency-resilient crops through agronomic and genetic biofortification.     

Synthesis and characterization of caprolactone based polyurethane with degradable and antifouling performance

In this work,a degradable polyurethane composed of caprolactone(CL)and L-Lactide(LLA)as soft seg-ments,and 4,4'-methylenebis(cyclohexyl isocyanate)(H12MDI)and polytetramethylene ether glycol(PTMEG)as hard segments,was prepared.Hydrolytic degradation experiment revealed that the degrad-able polyurethane(PU)could be degraded in artificial seawater.It also showed that caprolactone-co-polyurethane(CL-PU)copolymer with higher crystallinity degraded much slower in artificial seawater.However,the introduction of LLA resulted in an increase in the hydrophilicity and reduction in the crys-tallinity of degradable PU,as demonstrated by the contact angle analysis.The result of the scanning elec-tron microscope showed that the surface of degradable PU renewed under static condition.Moreover,degradable PU was able to be used as a carrier,and it controlled the release rate of 4,5-dichloro-2-octyl-isothiazolone(DCOIT).The anti-diatom(Navicula incerta)test demonstrated that the(caprolactone-co-L-lactide)-co-polyurethane 4(CL/LAx-PU4)with DCOIT contents prevented the adhe-sion of diatom Navicula incerta(88.37％reduction)due to their self-polishing and the release of antifou-lants.Therefore,the degradable PU consisted of CL,LLA,and DCOIT could be a durable resin with good antifouling activity for the application in the marine anti-biofouling field.     

Catalase (CAT) Gene Family in Rapeseed (Brassica napus L.): Genome-Wide Analysis,Identification, and Expression Pattern in Response to Multiple Hormones and Abiotic Stress Conditions

Catalase (CAT) is an antioxidant enzyme expressed by the CAT gene family and exists in almost all aerobic organisms. Environmental stresses induce the generation of reactive oxygen species (ROS) that eventually hinder plant growth and development. The CAT enzyme translates the hydrogen peroxide (H₂O₂) to water (H₂O) and reduce the ROS levels to shelter the cells’ death. So far, the CAT gene family has not been reported in rapeseed (Brassica napus L.). Therefore, a genome-wide comprehensive analysis was conducted to classify the CAT genes in the rapeseed genome. The current study identified 14 BnCAT genes in the rapeseed genome. Based on phylogenetic and synteny analysis, the BnCATs belong to four groups (Groups I–IV). A gene structure and conserved motif analysis showed that Group I, Group II, and Group IV possess almost the same intron/exon pattern, and an equal number of motifs, while Group III contains diverse structures and contain 15 motifs. By analyzing the cis-elements in the promoters, we identified five hormone-correlated responsive elements and four stress-related responsive elements. Further, six putative bna-miRNAs were also identified, targeting three genes (BnCAT4, BnCAT6, and BnCAT8). Gene ontology (GO) enrichment analysis showed that the BnCAT genes were largely related to cellular organelles, ROS response, stimulus response, stress response, and antioxidant enzymes. Almost 10 BnCAT genes showed higher expression levels in different tissues, i.e., root, leaf, stem, and silique. The expression analysis showed that BnCAT1–BnCAT3 and BnCAT11–BnCAT13 were significantly upregulated by cold, salinity, abscisic acid (ABA), and gibberellic acid (GA) treatment, but not by drought and methyl jasmonate (MeJA). Notably, most of the genes were upregulated by waterlogging stress, except BnCAT6, BnCAT9, and BnCAT10. Our results opened new windows for future investigations and provided insights into the CAT family genes in rapeseed.     

A Novel DUF569 Gene Is a Positive Regulator of the Drought Stress Response in Arabidopsis

In the last two decades, global environmental change has increased abiotic stress on plants and severely affected crops. For example, drought stress is a serious abiotic stress that rapidly and substantially alters the morphological, physiological, and molecular responses of plants. In Arabidopsis, several drought-responsive genes have been identified; however, the underlying molecular mechanism of drought tolerance in plants remains largely unclear. Here, we report that the “domain of unknown function” novel gene DUF569 (AT1G69890) positively regulates drought stress in Arabidopsis. The Arabidopsis loss-of-function mutant atduf569 showed significant sensitivity to drought stress, i.e., severe wilting at the rosette-leaf stage after water was withheld for 3 days. Importantly, the mutant plant did not recover after rewatering, unlike wild-type (WT) plants. In addition, atduf569 plants showed significantly lower abscisic acid accumulation under optimal and drought-stress conditions, as well as significantly higher electrolyte leakage when compared with WT Col-0 plants. Spectrophotometric analyses also indicated a significantly lower accumulation of polyphenols, flavonoids, carotenoids, and chlorophylls in atduf569 mutant plants. Overall, our results suggest that novel DUF569 is a positive regulator of the response to drought in Arabidopsis.     

PMSS: A programmable memory system and scheduler for complex memory patterns

HPC industry demands more computing units on FPGAs, to enhance the performance by using task/data parallelism. FPGAs can provide its ultimate performance on certain kernels by customizing the hardware for the applications. However, applications are getting more complex, with multiple kernels and complex data arrangements, generating overhead while scheduling/managing system resources. Due to this reason all classes of multi threaded machines–minicomputer to supercomputer–require to have efficient hardware scheduler and memory manager that improves the effective bandwidth and latency of the DRAM main memory. This architecture could be a very competitive choice for supercomputing systems that meets the demand of parallelism for HPC benchmarks. In this article, we proposed a Programmable Memory System and Scheduler (PMSS), which provides high speed complex data access pattern to the multi threaded architecture. This proposed PMSS system is implemented and tested on a Xilinx ML505 evaluation FPGA board. The performance of the system is compared with a microprocessor based system that has been integrated with the Xilkernel operating system. Results show that the modified PMSS based multi-accelerator system consumes 50% less hardware resources, 32% less on-chip power and achieves approximately a 19x speedup compared to the MicroBlaze based system.     

Mammogram Enhancement Using Lifting Dyadic Wavelet Transform and Normalized Tsallis Entropy

In this paper, we present a new technique for mammogram enhancement using fast dyadic wavelet transform （FDyWT） based on lifted spline dyadic wavelets and normalized Tsallis entropy. First, a mammogram image is decom- posed into a multiscale hierarchy of low-subband and high-subband images using FDyWT. Then noise is suppressed using normalized Tsallis entropy of the local variance of the modulus of oriented high-subband images. After that, the wavelet coefficients of high-subbands are modified using a non-linear operator and finally the low-subband image at the first scale is modified with power law transformation to suppress background. Though FDyWT is shift-invariant and has better poten- tial for detecting singularities like edges, its performance depends on the choice of dyadic wavclcts. On the other hand, the nulnber of vanishing moments is an important characteristic of dyadic wavelets for singularity analysis because it provides an upper bound measurement for singularity characterization. Using lifting dyadic schemes, we construct lifted spline dyadic wavelets of different degrees with increased number of vanishing moments. We also examine the effect of these wavelets on mammogram enhancement. The method is tested on mammogram images, taken from MIAS （Mammographic Image Analysis Society） database, having various background tissue types and containing different abnormalities. The comparison with tile state-of-the-art contrast enhancement methods reveals that the proposed method performs better and the difference is statistically significant.     

Effect of particle dimension on biocompatibility of carbon nanomaterials

With various emerging applications ranging from medicine to materials and electronics, the risk of exposure to nanomaterials is rapidly increasing. Several routes of exposure to nanomaterials exist; the most important being dermal contact and inhalation. In this dermal toxicity study, the cellular effects of carbon-based materials with diameters ranging from micro- to nano-dimension were investigated using mouse keratinocytes (HEL-30). The carbon materials tested included carbon fibers (CF; 10 μm diameter), carbon nanofibers (CNF; 100 nm diameter), multi-walled carbon nanotubes (MWCNT; 10 nm diameter), and single-walled carbon nanotubes (SWCNT; 1 nm diameter). CF and CNF did not significantly affect cell viability; however, MWCNT and SWCNT reduced cell viability in a time-dependent manner up to 48 h, with full recovery of mitochondrial function by the 72 h time point. After a 24 h exposure, cells exposed to MWCNT produced up to 3-fold higher increase in reactive oxygen species than those exposed to SWCNT. The results of this study suggest that high-aspect ratio carbon material toxicity is dependent on dimension and composition.     

Uptake of Pb(II) and Cd(II) by a new phenolformaldehyde polymer resin derived by the insertion of sulfur ligands in the form of xanthate

A new phenolformaldehyde polymer resin containing potential soft‐type donor atoms (sulfur atoms) was synthesized by the reaction of sodium salt of 2,4‐dihydroxyacetophenone formaldehyde resin with carbon disulfide. The resin was characterized by elemental analysis, IR, and ¹H‐NMR spectral studies. Because of its insolubility in aqueous media, the resin was successfully used in the removal of Pb(II) and Cd(II). Parameters such as the effect of pH, the effect of time, competitive studies, the effect of initial metal‐ion concentration, and the recyclability of the polymer resin were studied. The amount of metal removed by the resin was determined with atomic absorption spectrophotometry. The retention properties were strongly dependent on pH. The elution of metal ions was investigated in acid media. © 2003 Wiley Periodicals, Inc. J Appl Polym Sci 91: 1932–1936, 2004     

PROCESS CONTROL PERSPECTIVE FOR PROCESS ANALYTICAL TECHNOLOGY: INTEGRATION OF CHEMICAL ENGINEERING PRACTICE INTO SEMICONDUCTOR AND PHARMACEUTICAL INDUSTRIES

FDA's Process Analytical Technology (PAT) initiative provides an unprecedented opportunity for chemical engineers to play significant roles in the pharmaceutical industry. In this article, the authors provide their perspectives on (1) the need for chemical engineering principles in pharmaceutical development for a thorough process understanding; (2) applications of chemical engineering principles to meet the challenges from the semiconductor and pharmaceutical industries; and (3) the integration of chemical engineering practice into the semiconductor and pharmaceutical industries to achieve process understanding and the desired state of quality-by-design. A real-world case study from the semiconductor industry is presented to demonstrate how a classic chemical engineering concept, mixing homogeneity, can be implemented by inducing forced flow to ensure an excellent copper electrochemical plating process performance and to improve product quality substantially. Further, a case study of brake system design is discussed with the concept of Dr. Taguchi's robust engineering design to illustrate how quality-by-design can be achieved through appropriate experimental design, in conjunction with the discussion on the concept of quality-by-design in pharmaceuticals. Third, a case study of freeze-dried sodium ethacrynate is presented to demonstrate the vital importance of controlling the processing factors to achieve the desired product stability. Finally, the problems of the current pharmaceutical manufacturing mode, the opportunities and engineering challenges during implementation of PAT in the pharmaceutical industry, and the role of chemical engineering in implementation of PAT is discussed in detail.     

YAG thermal barrier coatings deposited by suspension and solution precursor thermal spray

Yttrium aluminium garnet (YAG) is a promising topcoat material for thermal barrier coatings due to its high temperature stability and better CMAS (calcium-magnesium-alumino-silicate) resistance. YAG topcoats were deposited by suspension and solution precursor high-velocity oxy-fuel (HVOF) thermal spray. The relationships between processing, microstructure and final properties were studied through a range of characterization techniques and thermal cycling tests. The microstructure of the as-sprayed YAG topcoat from stoichiometric solution precursor (SP-YAG) had distributed pores and inter-splat boundaries, while the as-sprayed topcoat produced from suspension (S-YAG) had vertical and branched micro cracks, pores, and inter-splat boundaries. Both as-sprayed coatings were composed of amorphous phase, hexagonal yttrium aluminium perovskite (YAP) and cubic YAG. In thermal cycling tests, 20% of SP-YAG failure was reached after the 10th cycle; whereas, S-YAG reached the failure criteria between the 60th and 70th cycle. The failure of both the SP-YAG and the S-YAG topcoats occurred due to thermal stresses during the thermal cycling.